Release Notes 26.x - Versionsgeschichte

Cg: /* Release 26.2 (Q4 2026) */

2026-08-25T14:38:37Z

Release 26.2 (Q4 2026)

← Nächstältere Version		Version vom 25. August 2026, 14:38 Uhr
Zeile 15:		Zeile 15:
	* Feature: '''NEW''' [[SNMP Plugin Reference/en\|SNMP]] support, reimplemented in expecco itself - no ''net-snmp'' installation is needed any more, and the blocks behave identically on every supported platform. SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128); a whole table read by one block with its rows and their INDEX decoded (ifTable, ipAddrTable, tcpConnTable, ...); many devices asked the same question at once, in parallel; traps and informs both received and sent. An up to date set of MIB modules (net-snmp 5.9.5.2) is delivered, so the names of SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB and friends resolve out of the box - the deprecated RFC1213-MIB groups (''at'', ''egp'', ''ipRouteTable'') are not part of it and are shown numerically, add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still needs those names. Fixes on the way: object identifiers were corrupted on 64bit systems, which made most SNMP blocks return wrong values.		* Feature: '''NEW''' [[SNMP Plugin Reference/en\|SNMP]] support, reimplemented in expecco itself - no ''net-snmp'' installation is needed any more, and the blocks behave identically on every supported platform. SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128); a whole table read by one block with its rows and their INDEX decoded (ifTable, ipAddrTable, tcpConnTable, ...); many devices asked the same question at once, in parallel; traps and informs both received and sent. An up to date set of MIB modules (net-snmp 5.9.5.2) is delivered, so the names of SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB and friends resolve out of the box - the deprecated RFC1213-MIB groups (''at'', ''egp'', ''ipRouteTable'') are not part of it and are shown numerically, add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still needs those names. Fixes on the way: object identifiers were corrupted on 64bit systems, which made most SNMP blocks return wrong values.
	* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.		* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.
	* Feature: documentation can now be given in [[https://www.markdownguide.org/basic-syntax/\|markdown format]].		* Feature: documentation can now be given in [https://www.markdownguide.org/basic-syntax markdown format].
	* Fix: JSON printer's recursive store detection was generating false positives		* Fix: JSON printer's recursive store detection was generating false positives
	* Fix: wrong (not detected) error handling in UDP send/receive operation under Windows.		* Fix: wrong (not detected) error handling in UDP send/receive operation under Windows.

Cg: /* Release 26.2 (Q4 2026) */

2026-08-25T14:37:47Z

Release 26.2 (Q4 2026)

← Nächstältere Version		Version vom 25. August 2026, 14:37 Uhr
Zeile 15:		Zeile 15:
	* Feature: '''NEW''' [[SNMP Plugin Reference/en\|SNMP]] support, reimplemented in expecco itself - no ''net-snmp'' installation is needed any more, and the blocks behave identically on every supported platform. SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128); a whole table read by one block with its rows and their INDEX decoded (ifTable, ipAddrTable, tcpConnTable, ...); many devices asked the same question at once, in parallel; traps and informs both received and sent. An up to date set of MIB modules (net-snmp 5.9.5.2) is delivered, so the names of SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB and friends resolve out of the box - the deprecated RFC1213-MIB groups (''at'', ''egp'', ''ipRouteTable'') are not part of it and are shown numerically, add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still needs those names. Fixes on the way: object identifiers were corrupted on 64bit systems, which made most SNMP blocks return wrong values.		* Feature: '''NEW''' [[SNMP Plugin Reference/en\|SNMP]] support, reimplemented in expecco itself - no ''net-snmp'' installation is needed any more, and the blocks behave identically on every supported platform. SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128); a whole table read by one block with its rows and their INDEX decoded (ifTable, ipAddrTable, tcpConnTable, ...); many devices asked the same question at once, in parallel; traps and informs both received and sent. An up to date set of MIB modules (net-snmp 5.9.5.2) is delivered, so the names of SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB and friends resolve out of the box - the deprecated RFC1213-MIB groups (''at'', ''egp'', ''ipRouteTable'') are not part of it and are shown numerically, add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still needs those names. Fixes on the way: object identifiers were corrupted on 64bit systems, which made most SNMP blocks return wrong values.
	* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.		* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.
			* Feature: documentation can now be given in [[https://www.markdownguide.org/basic-syntax/\|markdown format]].
	* Fix: JSON printer's recursive store detection was generating false positives		* Fix: JSON printer's recursive store detection was generating false positives
	* Fix: wrong (not detected) error handling in UDP send/receive operation under Windows.		* Fix: wrong (not detected) error handling in UDP send/receive operation under Windows.

Cg: /* Release 26.2 (Q4 2026) */

2026-08-25T13:16:00Z

Release 26.2 (Q4 2026)

← Nächstältere Version		Version vom 25. August 2026, 13:16 Uhr
Zeile 16:		Zeile 16:
	* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.		* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.
	* Fix: JSON printer's recursive store detection was generating false positives		* Fix: JSON printer's recursive store detection was generating false positives
	* Fix: ~~falsche~~ (~~nicht~~ ~~erkannte~~) ~~Fehlererkennung~~ ~~bei~~ UDP send/receive ~~unter~~ Windows.		* Fix: wrong (not detected) error handling in UDP send/receive operation under Windows.
	* Fix: Python Bridge: fix/workaround um Python's ~~Verhalten~~ ~~nach~~ ~~Abbruch~~ ~~eines~~ ~~Threads der~~ in ~~einer~~ ~~blockierenden~~ I/O ~~Operation~~ ~~fest~~ ~~steckt~~ (~~global~~ Interpreter Lock). ~~Führte~~ zu ~~einer~~ ~~Blockade~~ ~~von~~ ~~expecco~~ (~~gesperrte~~ ~~Critical~~ ~~Region,~~ ~~die~~ ~~nicht~~ ~~entsperrt~~ ~~wurde~~). ~~Aus~~ ~~dieser~~ ~~Situation~~ ~~kam~~ ~~man~~ ~~nur~~ ~~durch~~ ~~Eingabe~~ ~~von CTRL~~-C ~~oder~~ Pause in ~~den~~ ~~Debugger~~ ~~und~~ ~~dann~~ ~~mit~~ ~~Abort~~ ~~wieder~~ in expecco. Python Bridge ~~musste~~ ~~danach~~ ~~neu~~ ~~gestared~~ ~~werden~~.		* Fix: Python Bridge: fix/workaround addressing Python's behavior when a thread stuck in a blocking I/O operation is terminated (due to the Global Interpreter Lock). This issue caused expecco to hang (a critical region remained locked and was not released). The only way to recover was to press Ctrl-C or Pause to enter the debugger, then abort to return to expecco; the Python Bridge had to be restarted afterwards.
	* Improvement: better Python syntax highlighter		* Improvement: better Python syntax highlighter
			* Improvement: more (full set) of ANSI escape sequences handled by the terminal emulator (req'd eg. for the SSH remote terminal access). Also hardened against malicious ANSI escape bombs (invalid escape sequences)

	== Release 26.1 (Q2 2026) ==		== Release 26.1 (Q2 2026) ==

Cg: /* Release 26.2 (Q4 2026) */

2026-08-25T13:12:09Z

Release 26.2 (Q4 2026)

← Nächstältere Version		Version vom 25. August 2026, 13:12 Uhr
Zeile 16:		Zeile 16:
	* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.		* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.
	* Fix: JSON printer's recursive store detection was generating false positives		* Fix: JSON printer's recursive store detection was generating false positives
			* Fix: falsche (nicht erkannte) Fehlererkennung bei UDP send/receive unter Windows.
			* Fix: Python Bridge: fix/workaround um Python's Verhalten nach Abbruch eines Threads der in einer blockierenden I/O Operation fest steckt (global Interpreter Lock). Führte zu einer Blockade von expecco (gesperrte Critical Region, die nicht entsperrt wurde). Aus dieser Situation kam man nur durch Eingabe von CTRL-C oder Pause in den Debugger und dann mit Abort wieder in expecco. Python Bridge musste danach neu gestared werden.
	* Improvement: better Python syntax highlighter		* Improvement: better Python syntax highlighter

Sv: 26.2: native Remote Access SSH/SFTP action blocks (link to main article)

2026-08-21T18:19:01Z

26.2: native Remote Access SSH/SFTP action blocks (link to main article)

← Nächstältere Version		Version vom 21. August 2026, 18:19 Uhr
Zeile 14:		Zeile 14:
	* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)		* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)
	* Feature: '''NEW''' [[SNMP Plugin Reference/en\|SNMP]] support, reimplemented in expecco itself - no ''net-snmp'' installation is needed any more, and the blocks behave identically on every supported platform. SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128); a whole table read by one block with its rows and their INDEX decoded (ifTable, ipAddrTable, tcpConnTable, ...); many devices asked the same question at once, in parallel; traps and informs both received and sent. An up to date set of MIB modules (net-snmp 5.9.5.2) is delivered, so the names of SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB and friends resolve out of the box - the deprecated RFC1213-MIB groups (''at'', ''egp'', ''ipRouteTable'') are not part of it and are shown numerically, add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still needs those names. Fixes on the way: object identifiers were corrupted on 64bit systems, which made most SNMP blocks return wrong values.		* Feature: '''NEW''' [[SNMP Plugin Reference/en\|SNMP]] support, reimplemented in expecco itself - no ''net-snmp'' installation is needed any more, and the blocks behave identically on every supported platform. SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128); a whole table read by one block with its rows and their INDEX decoded (ifTable, ipAddrTable, tcpConnTable, ...); many devices asked the same question at once, in parallel; traps and informs both received and sent. An up to date set of MIB modules (net-snmp 5.9.5.2) is delivered, so the names of SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB and friends resolve out of the box - the deprecated RFC1213-MIB groups (''at'', ''egp'', ''ipRouteTable'') are not part of it and are shown numerically, add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still needs those names. Fixes on the way: object identifiers were corrupted on 64bit systems, which made most SNMP blocks return wrong values.
			* Feature: the [[Remote Access/en#From expecco actions\|Remote Access]] plugin gained '''native''' (pure-Smalltalk, via <code>exept:libcrypt/ssh</code>) SSH and SFTP action blocks — SSH open/close, execute command (with optional stdin), execute a list of commands (each on its own channel or in one persistent shell), password authentication, and SFTP upload (from a file, String or stream), download (to a file and/or a stream, streamed without buffering), list, delete, rename and make-directory; each block ships with a runnable Test/Demo network. No external <code>ssh</code>/<code>plink</code> binary is required.
	* Fix: JSON printer's recursive store detection was generating false positives		* Fix: JSON printer's recursive store detection was generating false positives
	* Improvement: better Python syntax highlighter		* Improvement: better Python syntax highlighter

Sv: 26.2: the four SNMP entries consolidated into one

2026-08-21T12:10:26Z

26.2: the four SNMP entries consolidated into one

← Nächstältere Version		Version vom 21. August 2026, 12:10 Uhr
Zeile 13:		Zeile 13:
	* Feature: improved SSDP service announcement		* Feature: improved SSDP service announcement
	* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)		* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)
			* Feature: '''NEW''' [[SNMP Plugin Reference/en\|SNMP]] support, reimplemented in expecco itself - no ''net-snmp'' installation is needed any more, and the blocks behave identically on every supported platform. SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128); a whole table read by one block with its rows and their INDEX decoded (ifTable, ipAddrTable, tcpConnTable, ...); many devices asked the same question at once, in parallel; traps and informs both received and sent. An up to date set of MIB modules (net-snmp 5.9.5.2) is delivered, so the names of SNMPv2-MIB, IF-MIB, IP-MIB, TCP-MIB and friends resolve out of the box - the deprecated RFC1213-MIB groups (''at'', ''egp'', ''ipRouteTable'') are not part of it and are shown numerically, add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still needs those names. Fixes on the way: object identifiers were corrupted on 64bit systems, which made most SNMP blocks return wrong values.
	* Feature: new [[SNMP Plugin Reference/en\|SNMP]] blocks: read a whole table (ifTable, ipAddrTable, tcpConnTable, ...) with its rows and their INDEX decoded, ask many devices the same question at once, and receive traps and informs with a trap listener as well as send them.
	* Improvement: the [[SNMP Plugin Reference/en\|'''SNMP''']] blocks no longer use the external ''net-snmp'' library; SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128) are now implemented in expecco itself and behave identically on all supported platforms.
	* Improvement: an up to date set of MIB modules (from net-snmp 5.9.5.2) is delivered with the SNMP library, so symbolic names such as those of IF-MIB, IP-MIB or TCP-MIB are resolved out of the box. The deprecated RFC1213-MIB groups (''at'', ''egp'' and ''ipRouteTable'') are no longer part of it and are shown numerically instead; add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still requires those names.
	* Fix: SNMP object identifiers were corrupted on 64bit systems, so that most SNMP blocks returned wrong values.
	* Fix: JSON printer's recursive store detection was generating false positives		* Fix: JSON printer's recursive store detection was generating false positives
	* Improvement: better Python syntax highlighter		* Improvement: better Python syntax highlighter

Sv: 26.2 SNMP: link to the plugin page, SHA-2, tables and traps

2026-08-21T12:05:47Z

26.2 SNMP: link to the plugin page, SHA-2, tables and traps

← Nächstältere Version		Version vom 21. August 2026, 12:05 Uhr
Zeile 13:		Zeile 13:
	* Feature: improved SSDP service announcement		* Feature: improved SSDP service announcement
	* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)		* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)
			* Feature: new [[SNMP Plugin Reference/en\|SNMP]] blocks: read a whole table (ifTable, ipAddrTable, tcpConnTable, ...) with its rows and their INDEX decoded, ask many devices the same question at once, and receive traps and informs with a trap listener as well as send them.
	* Improvement: the '''SNMP''' blocks no longer use the external ''net-snmp'' library; SNMP v1, v2c and v3 (authentication with MD5 or SHA-1, encryption with DES or AES-128) are now implemented in expecco itself and behave identically on all supported platforms.		* Improvement: the [[SNMP Plugin Reference/en\|'''SNMP''']] blocks no longer use the external ''net-snmp'' library; SNMP v1, v2c and v3 (authentication with MD5, SHA-1 or one of the SHA-2 protocols of RFC 7860, encryption with DES or AES-128) are now implemented in expecco itself and behave identically on all supported platforms.
	* Improvement: an up to date set of MIB modules (from net-snmp 5.9.5.2) is delivered with the SNMP library, so symbolic names such as those of IF-MIB, IP-MIB or TCP-MIB are resolved out of the box. The deprecated RFC1213-MIB groups (''at'', ''egp'' and ''ipRouteTable'') are no longer part of it and are shown numerically instead; add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still requires those names.		* Improvement: an up to date set of MIB modules (from net-snmp 5.9.5.2) is delivered with the SNMP library, so symbolic names such as those of IF-MIB, IP-MIB or TCP-MIB are resolved out of the box. The deprecated RFC1213-MIB groups (''at'', ''egp'' and ''ipRouteTable'') are no longer part of it and are shown numerically instead; add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still requires those names.
	* Fix: SNMP object identifiers were corrupted on 64bit systems, so that most SNMP blocks returned wrong values.		* Fix: SNMP object identifiers were corrupted on 64bit systems, so that most SNMP blocks returned wrong values.

Sv: 26.2: SNMP without net-snmp, current MIBs, 64bit OID fix

2026-08-16T14:38:25Z

26.2: SNMP without net-snmp, current MIBs, 64bit OID fix

← Nächstältere Version		Version vom 16. August 2026, 14:38 Uhr
Zeile 13:		Zeile 13:
	* Feature: improved SSDP service announcement		* Feature: improved SSDP service announcement
	* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)		* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)
			* Improvement: the '''SNMP''' blocks no longer use the external ''net-snmp'' library; SNMP v1, v2c and v3 (authentication with MD5 or SHA-1, encryption with DES or AES-128) are now implemented in expecco itself and behave identically on all supported platforms.
			* Improvement: an up to date set of MIB modules (from net-snmp 5.9.5.2) is delivered with the SNMP library, so symbolic names such as those of IF-MIB, IP-MIB or TCP-MIB are resolved out of the box. The deprecated RFC1213-MIB groups (''at'', ''egp'' and ''ipRouteTable'') are no longer part of it and are shown numerically instead; add ''RFC1213-MIB.txt'' to a MIB directory ("Add MIB Directory") if a device still requires those names.
			* Fix: SNMP object identifiers were corrupted on 64bit systems, so that most SNMP blocks returned wrong values.
	* Fix: JSON printer's recursive store detection was generating false positives		* Fix: JSON printer's recursive store detection was generating false positives
	* Improvement: better Python syntax highlighter		* Improvement: better Python syntax highlighter

Cg: /* Release 26.2 (Q4 2026) */

2026-08-14T11:17:31Z

Release 26.2 (Q4 2026)

← Nächstältere Version		Version vom 14. August 2026, 11:17 Uhr
Zeile 12:		Zeile 12:
	* Feature: TEAM support; multiple teams users can live-edit the same suite for merge, group development, passing work to other users or demonstration.		* Feature: TEAM support; multiple teams users can live-edit the same suite for merge, group development, passing work to other users or demonstration.
	* Feature: improved SSDP service announcement		* Feature: improved SSDP service announcement
	* ~~Fix~~: full ipV6 UDP support (mostly socketAddress fixes and multicast support)		* Feature: full ipV6 UDP support (mostly socketAddress fixes and multicast support)
			* Fix: JSON printer's recursive store detection was generating false positives
			* Improvement: better Python syntax highlighter

	== Release 26.1 (Q2 2026) ==		== Release 26.1 (Q2 2026) ==

Cg: /* Release 26.2 (Q4 2026) */

2026-08-05T10:32:16Z

Release 26.2 (Q4 2026)

← Nächstältere Version		Version vom 5. August 2026, 10:32 Uhr
Zeile 5:		Zeile 5:
	* Feature: [[ElementaryBlock_Element/en#Scheme_Blocks_(Bridged)\|bridged Scheme]] (currently only Racket Scheme) action blocks		* Feature: [[ElementaryBlock_Element/en#Scheme_Blocks_(Bridged)\|bridged Scheme]] (currently only Racket Scheme) action blocks
	* Feature: [[ElementaryBlock_Element/en#Octave_Blocks_(Bridged)\|bridged Octave/Matlab]] action blocks		* Feature: [[ElementaryBlock_Element/en#Octave_Blocks_(Bridged)\|bridged Octave/Matlab]] action blocks
	* Feature: bridged C# action blocks		* Feature: [[Expecco_API/en#C#_Actions\|bridged C#]] action blocks
	* Feature: '''NEW''' AI Coding provider "'''Claude Code (subscription)'''" — uses your existing Claude subscription via the locally installed ''Claude Code'' command line program instead of an API key, so no key has to be entered and no per-token API charges are billed. Choose it like any other provider in the settings dialog (Plugins → AI Coding); the API key, endpoint URL and proxy fields are hidden for it because they do not apply, and the authentication method reads "Subscription (external login)". It requires ''Claude Code'' to be installed and logged in once (run <code>claude</code> in a terminal and complete the login). The model is selectable either as a tier alias (''sonnet'', ''opus'', ''haiku'' — always the current model of that tier) or as a pinned model id.		* Feature: '''NEW''' AI Coding provider "'''Claude Code (subscription)'''" — uses your existing Claude subscription via the locally installed ''Claude Code'' command line program instead of an API key, so no key has to be entered and no per-token API charges are billed. Choose it like any other provider in the settings dialog (Plugins → AI Coding); the API key, endpoint URL and proxy fields are hidden for it because they do not apply, and the authentication method reads "Subscription (external login)". It requires ''Claude Code'' to be installed and logged in once (run <code>claude</code> in a terminal and complete the login). The model is selectable either as a tier alias (''sonnet'', ''opus'', ''haiku'' — always the current model of that tier) or as a pinned model id.
	* Feature: two new AI actions that work on the selected '''class''' rather than on a single method, reachable from the '''AI''' menu of the class browser: "'''Explain Class'''" explains the class as a whole — what it is responsible for, what its instance variables hold and how its protocols fit together — and "'''Generate Class Documentation'''" proposes a class documentation text which the "[Apply]" button installs into the class' documentation.		* Feature: two new AI actions that work on the selected '''class''' rather than on a single method, reachable from the '''AI''' menu of the class browser: "'''Explain Class'''" explains the class as a whole — what it is responsible for, what its instance variables hold and how its protocols fit together — and "'''Generate Class Documentation'''" proposes a class documentation text which the "[Apply]" button installs into the class' documentation.